STAUNTON – The following is a list of highway work that may affect traffic in the Staunton transportation district during the coming weeks. The Staunton District consists of 11 counties from the Alleghany Highlands to the northern Shenandoah Valley: Alleghany, Bath, Rockbridge, Highland, Augusta, Rockingham, Page, Shenandoah, Frederick, Clarke and Warren.
Scheduled work is subject to change due to inclement weather and material supplies. Motorists are advised to watch for slow-moving tractors during mowing operations. When traveling through a work zone, be alert to periodic changes in traffic patterns and lane closures.
*NEW* or *UPDATE* indicates a new or revised entry since last week’s report.
ALLEGHANY COUNTY
INTERSTATE 64
*NEW* Mile marker 5 to 4, westbound – Right shoulder closures for ditch cleaning operations, Monday through Thursday from 7 a.m. to 5:30 p.m.
Mile marker 14 to 16, eastbound and westbound – Alternating lane closures for maintenance to bridges over Jackson River, 6 a.m. to 6 p.m. through July 14.
*UPDATE* Mile marker 18 to 21, eastbound – Left lane closures for cleaning under cable rails, Monday through Thursday from 7 a.m. to 5 p.m.
PRIMARY ROADS
*NEW* Route 18 (Potts Creek Road) – Flagger traffic control between Route 614 (Castile Road) and Route 788 (Llama Drive) for slope repairs, May 22 – June 30 from 7 a.m. to 5 p.m.
Various roads – Flagger traffic control for tree and debris removal, drainage work, pothole patching, brush cutting and shoulder repairs. Weekdays from 7:30 a.m. to 3 p.m.
SECONDARY ROADS
Various roads – Flagger traffic control for ditch work, pipe replacement and brush cutting. Weekdays from 7:30 a.m. to 3 p.m.
BATH COUNTY
PRIMARY ROADS
Route 220 (Sam Snead Highway) – Flagger traffic control between Route 651 (Burger Lane) and Route 615 (Main Street, Hot Springs) for utility work, 8:30 a.m. to 7:30 p.m. through October 6.
Various roads – Flagger traffic control for shoulder repairs and pipe cleaning. Weekdays from 7:30 a.m. to 3 p.m.
SECONDARY ROADS
Various roads – Flagger traffic control for brush cutting and pipe cleaning. Weekdays from 7:30 a.m. to 3 p.m.
ROCKBRIDGE COUNTY
INTERSTATE 64
*NEW* Mile marker 53 to 55, eastbound and westbound – Right shoulder closures including along Exit 55 off-ramps for sign work, Monday through Friday from 8 a.m. to 5 p.m.
INTERSTATE 81
*UPDATE* Mile marker 175 to 184, northbound and southbound – Right shoulder closures for shoulder repairs, Monday to Thursday from 7 a.m. to 5:30 p.m.
Mile marker 176 to 178, northbound – Overnight alternating lane closures for maintenance to bridge over Cedar Creek, 8 p.m. to 7 a.m. through night of July 28.
PRIMARY ROADS
Route 11 (Lee Highway) – Southbound alternating lane closures between Conifer Lane and Route 1025 (Boundary Line Lane) for pavement widening, guardrail improvements, installation of rumble strips and pavement markings, 6 a.m. to 8 p.m. through June 4.
*NEW* Route 60 (West Nelson Street, Lexington) – Flagger traffic control between East Denny Circle and Liberty Hall Road/Frank Parsons Way for inspection of bridge over Woods Creek, Thursday from 8:30 a.m. to 12 noon.
Various roads – Flagger traffic control for pipe replacement, ditch work, tree removal, shoulder repairs, pavement patching and brush cutting. Mobile lane closures for mowing. Weekdays from 7:30 a.m. to 3 p.m.
SECONDARY ROADS
Route 608 (Shafer Lane) – Closed to through traffic through June 29 between Route 130 (Wert Falkner Highway) and Route 708 (Gilmores Mill Road) for replacement of Cedar Creek bridge. Follow posted detour.
Various roads – Flagger traffic control for grading, pipe replacement, ditch work, tree removal, pavement patching, shoulder repairs and brush cutting. Mobile lane closures for mowing. Weekdays from 7:30 a.m. to 3 p.m.
HIGHLAND COUNTY
PRIMARY ROADS
*NEW* Route 250 (Highland Turnpike) – Flagger traffic control between Route 615 (Davis Run Road) and Route 656 (Bertie Lane) for paving operations, 7 a.m. to 5 p.m. through June 30.
Route 250 (Highland Turnpike) – Flagger traffic control between Route 631 (Rich Hills Road) and Route 615 (Davis Run Road) for utility work, 8 a.m. to 4 p.m. through July 27.
Various roads – Flagger traffic control for pothole patching, brush cutting and shoulder repairs. Weekdays from 7:30 a.m. to 3 p.m.
SECONDARY ROADS
Various roads – Flagger traffic control for brush cutting, pipe cleaning, tree removal, adding stone to unpaved roads and ditch work. Weekdays from 7:30 a.m
AUGUSTA COUNTY
INTERSTATE 64
Mile marker 87 to 100, eastbound and westbound – Overnight mobile lane closures for vegetation management, 7 p.m. to 7 a.m. through Thursday night.
Mile marker 87 to 95, eastbound – Overnight single lane closures including along off-ramps for paving operations, 7 p.m. to 7 a.m. through Monday night.
*UPDATE* Mile marker 91 to 99, eastbound and westbound – Shoulder closures for shoulder repairs and ditch cleaning, Monday through Thursday from 7 a.m. to 5:30 p.m.
Mile marker 97 to 95, westbound – Overnight single lane closures for maintenance to various bridges, 8 p.m. to 7 a.m. through night of June 8. Occasional overnight on-ramp closures at exit 96. During ramp closures, traffic will be detoured to exit 94.
INTERSTATE 81
Mile marker 205 to 237, northbound and southbound – Overnight mobile lane closures for vegetation management, 7 p.m. to 7 a.m. through Thursday night.
*NEW* Mile marker 219 to 224, northbound and southbound – Right shoulder closures including along Exit 222 off-ramps for sign work, Monday through Friday from 8 a.m. to 8 p.m.
*NEW* Mile marker 221 to 224, northbound and southbound – Right shoulder closures for litter pickup operations, Monday from 7 a.m. to 3 p.m.
*UPDATE* Mile marker 225 to 219, southbound – Right shoulder closures for utility work, 7 a.m. to 5 p.m. through June 5.
Mile marker 234 to 235, northbound – Overnight single lane closures for maintenance to bridge over railway, 8 p.m. to 7 a.m. through Thursday night.
PRIMARY ROADS
*NEW* Route 11 (Lee Highway, Mount Sidney) – Northbound and southbound single lane closures and flagger traffic control between Route 646 (Fadley Road) and Bolivar Street/Mount Sidney School Lane for paving operations, 7 a.m. to 5 p.m. through June 30.
*NEW* Route 11 (Lee-Jackson Highway) – Northbound and southbound single lane closures between Route 666 (Lofton Road) and Rockbridge County line for paving operations, 7 a.m. to 5 p.m. through June 30.
*NEW* Route 250 (Jefferson Highway, Fishersville) – Eastbound and westbound single lane closures between Route 1005 (Chandelle Boulevard) and Route 637 (Jericho Road) for paving operations, 7 a.m. to 5 p.m. through June 30.
Route 250 (Hanky Mountain Highway) – Flagger traffic control between Route 629 (Deerfield Valley Road) and Route 728 (Stover Shop Road) for maintenance of Jennings Branch bridge, 6 a.m. to 7 p.m. through June 5.
*NEW* Route 262 (Woodrow Wilson Parkway) – Shoulder closures just east of Route 252 (Middlebrook Road) for sign work Monday through Friday from 8 a.m. to 5 p.m.
*NEW* Route 340 (Stuarts Draft Highway) – Northbound and southbound single lane closures between Route 1721 (Grandview Drive) and Route 649 (Augusta Farms Road/Locust Grove Lane) for paving operations, 7 a.m. to 5 p.m. through June 30.
SECONDARY ROADS
Route 601 (Estaline Valley Road) – Flagger traffic control between Route 811 (Augusta Springs Road) and Route 603 (Pond Gap Lane) for maintenance to bridge over Little Calfpasture River, 6 a.m. to 6 p.m. through May 31.
*NEW* Route 610 (Howardsville Turnpike) – Closed to through traffic between Route 633 (Patton Farm Road) and Route 848 (Rankin Lane) for replacement of bridge over Kennedy Creek with box culvert, May 31 – June 29. Follow posted detour.
*NEW* Route 654 (White Hill Road, Stuarts Draft) – Flagger traffic control between Route 652 (Guthrie Road) and Route 11 (Lee-Jackson Highway) for paving operations, 7 a.m. to 5 p.m. through June 30.
Route 716 (West Augusta Road) – Closed to through traffic for maintenance to bridge over Ramsey’s Draft through Thursday. Traffic will detour to Route 629 (Deerfield Road) and Route 250 (Hankey Mountain Highway).
Various roads – Mobile traffic control for mowing operations. Flagger traffic control for drainage work, tree removal, shoulder repairs, pavement patching and brush cutting. Weekdays from 7:30 a.m. to 3 p.m.
