STAUNTON, VA (VR) – The following is a list of highway work that may affect traffic in the Staunton transportation district during the coming weeks. The Staunton District consists of 11 counties from the Alleghany Highlands to the northern Shenandoah Valley: Alleghany, Bath, Rockbridge, Highland, Augusta, Rockingham, Page, Shenandoah, Frederick, Clarke and Warren.
Scheduled work is subject to change due to inclement weather and material supplies. Motorists are advised to watch for slow-moving tractors during mowing operations. When traveling through a work zone, be alert to periodic changes in traffic patterns and lane closures.
*NEW* or *UPDATE* indicates a new or revised entry since last week’s report.
ALLEGHANY COUNTY
INTERSTATE 64
*NEW* Mile marker 14 to 20, eastbound and westbound – Right shoulder closures along off-ramps for sign work, 8 a.m. to 5 p.m. Monday through Friday.
Mile marker 38 to 13, westbound – Single-lane closures for paving operations at several locations, 7 a.m. to 8 p.m. through June 21.
*NEW* Mile marker 41 to 40, westbound – Right shoulder closures for shoulder repairs, 7 a.m. to 5 p.m. through Wednesday and Thursday.
PRIMARY ROADS
Various roads – Flagger traffic control for tree and debris removal, drainage work, pothole patching, brush cutting, ditching and shoulder repairs. Mobile traffic control for tractor mowing. Weekdays from 7:30 a.m. to 3 p.m.
SECONDARY ROADS
Various roads – Mobile flagging operation for pavement repairs on parts of Route 600/661 (Midland Trail), Route 683 (Callaghan Circle), Route 711 (Houston Circle), Route 719 (Bellegray Lane) and Route 9881 (Callaghan Elementary School access road), 7 a.m. to 7 p.m. through June 14.
Various roads – Flagger traffic control for ditch work, shoulder repairs, pothole repairs, pipe replacement and brush cutting. Mobile traffic control for tractor mowing. Weekdays from 7:30 a.m. to 3 p.m.
BATH COUNTY
PRIMARY ROADS
Route 39 (Mountain Valley Road) – Flagger and pilot truck traffic control between Route 600 (Bolars Draft Road) and Back Creek Mountain Road for paving operations, 5:30 a.m. to 6:30 p.m. weekdays through July 5.
Various roads – Flagger traffic control for shoulder repairs and pipe cleaning, 7:30 a.m. to 3 p.m. on weekdays.
SECONDARY ROADS
Various roads – Flagger traffic control for brush cutting and pipe cleaning, 7:30 a.m. to 3 p.m. on weekdays.
ROCKBRIDGE COUNTY
INTERSTATE 64
No lane closures reported.
INTERSTATE 81
*NEW* Mile marker 185 to 189, northbound – Overnight single lane closures for drainage work, 8 p.m. to 7 a.m. nights June 10 – 21.
*NEW* Mile marker 187 to 205, northbound – Right shoulder closures for sign work at various locations including off-ramp at exit 195, 8 a.m. to 5 p.m. Monday through Friday.
*NEW* Mile marker 193 to 191, southbound – Right shoulder closures for shoulder repairs, 7 a.m. to 5 p.m. Monday through Wednesday.
*NEW* Mile marker 195 to 205, northbound – Overnight single lane closures for pavement resurfacing, 8 p.m. to 7 a.m. nights June 13 – August 16.
*NEW* Mile marker 205 to 174, southbound – Right shoulder closures for mowing operations, 6 a.m. to 7 p.m. June 9 – 16.
PRIMARY ROADS
Various roads – Flagger traffic control for pipe replacement, ditch work, tree removal, shoulder repairs, pavement patching and brush cutting. Mobile lane closures for mowing, 7:30 to 3 p.m. on weekdays.
SECONDARY ROADS
Various roads – Flagger traffic control for grading, pipe replacement, ditch work, tree removal, pavement patching, shoulder repairs and brush cutting. Mobile lane closures for mowing, 7:30 a.m. to 3 p.m. on weekdays.
HIGHLAND COUNTY
PRIMARY ROADS
Various roads – Flagger traffic control for pothole patching, brush cutting and shoulder repairs, 7:30 a.m. to 3 p.m. on weekdays.
SECONDARY ROADS
*NEW* Various roads – Mobile flagging operation for pavement repairs on parts of Route 615 (Davis Run Road), Route 622 (River Bend Road), Route 629 (Strait Creek Road), Route 678 (Bullpasture River Road) and Route 9506, 7 a.m. to 7 p.m. through June 21.
Various roads – Flagger traffic control for brush cutting, pipe cleaning, tree removal, adding stone to unpaved roads and ditch work, 7:30 a.m. to 3 p.m. on weekdays.
AUGUSTA COUNTY
INTERSTATE 64
Mile marker 95 to 98, eastbound and westbound – Overnight single lane and shoulder closures for sign installation work, 7 p.m. to 5 a.m. Monday through Wednesday nights.
INTERSTATE 81
*NEW* Mile marker 205 to 211, northbound – Overnight single lane closures for pavement resurfacing, 8 p.m. to 7 a.m. nights June 13 – August 16.
Mile marker 206 to 236, northbound and southbound – Overnight single lane closures for paving operations, 8 p.m. to 7 a.m. nights through June 20.
*NEW* Mile marker 208 to 205, southbound – Right shoulder closures for shoulder repairs, 7 a.m. to 5:30 p.m. Monday to Thursday.
Mile marker 214 to 210, southbound – Alternating lane closures for milling and paving operations, 8 p.m. to 7 a.m. nights through July 25. Exit 213 traffic will be detoured during ramp paving.
*UPDATE* Mile marker 221 to 227, northbound and southbound – Left and right shoulder closures in place 24/7 through spring 2026. Work zone speed limit 60 miles an hour. Traffic restrictions are for I-81 widening project.
Mile marker 221 to 223, northbound – Overnight alternating lane closures for paving approaches to bridges over I-81 ramp and railway, 8 p.m. to 7 a.m. nights through June 20.
*NEW* Mile marker 224 to 223, southbound – Right shoulder closures for sign work, 8 a.m. to 5 p.m. Monday through Friday.
Mile marker 225 to 227, northbound and southbound – Overnight alternating lane closures for bridge maintenance, 8 p.m. to 7 a.m. nights through June 27.
PRIMARY ROADS
*UPDATE* Route 256 (Weyers Cave Road) – Flagger traffic control between Route 772 (Sulfur Pump Road) and Route 865 (Rockfish Road) for maintenance to bridge over Middle River, 7:30 a.m. to 5:30 p.m. through June 28.
*NEW* Route 340 (Stuarts Draft Highway) – Brief northbound and southbound closures between Route 654/909 (White Hill Road/Johnson Drive) and Route 608 (Draft Avenue/Tinkling Springs Road) for utility work, between 6 a.m. and 3 p.m. Sunday (June 9).
*NEW* Route 340 (Stuarts Draft Highway) – Southbound right shoulder closures between Route 1510 (Stuart Avenue) and Route 608 (Draft Avenue/Tinkling Spring Road) for sign work, 8 a.m. to 5 p.m. Monday through Friday.
SECONDARY ROADS
Route 610 (Howardsville Turnpike) – Flagger traffic control between Route 855 (Mill Creek Lane) and Route 623 (Back Creek Lane) for utility work, 9 a.m. to 2:30 p.m. through June 13.
*UPDATE* Route 619 (Purple Cow Road) – Flagger traffic control between Route 340 (East Side Highway) and Route 611 (Calf Mountain Road/Dooms Crossing Road) for utility pole installation, 9 a.m. to 2:30 p.m. through June 20.
Route 623 (Back Creek Lane) – Flagger traffic control between Route 610 (Howardsville Turnpike) and dead end for utility work, 9 a.m. to 2:30 p.m. through June 13.
Route 624 (South Delphine Avenue, Waynesboro) – Shoulder closures between South Oak Lane and Chinquapin Drive for work related to construction of Waynesboro Southern Corridor, through May 2025.
Route 635 (Barterbrook Road) – Closed between I-81 frontage roads (FR-217 and FR-218) for bridge replacement as part of I-81 southbound auxiliary lane project. Follow posted detour. Expected completion summer 2025.
Route 662 (Greenville School Road) – Flagger traffic control between Route 1205 (Main Street, Greenville) and Route 608 (Cold Springs Road) for utility work, 9 a.m. to 2:30 p.m. through June 13.
Route 664 (Lyndhurst Road, Waynesboro) – Shoulder closures between Miami Avenue and Purdue Street for work related to construction of Waynesboro Southern Corridor, through June 2025.
Route 670 (Wagon Shop Road) – Flagger traffic control between Route 675 (Callison Mill Road) and Route 674 (Pilson Road) for utility work, 9 a.m. to 2:30 p.m. through June 13.
Route 675/670/604 (Broadhead School Road/McClures Mill Road) – Flagger traffic control between Route 919 (Old Providence Road) and Route 675 (Callison Mill Road) for utility work, 8 a.m. to 5 p.m. through June 27.
Various roads – Mobile traffic control for mowing operations. Flagger traffic control for drainage work, tree removal, shoulder repairs, pavement patching and brush cutting, 7:30 to 3 p.m. on weekdays.